Pins

Chills on Wheels Heating and Air Contractors Inc in Jacksonville, FL inspected an HVAC unit, checked compressor amperage, and verified system temperatures. They identified an undersized 2.5-ton unit causing afternoon overheating and recommended upgrading to a 4-ton system with a proper line set for better performance.

Chills on Wheels Heating and Air Contractors Inc performed maintenance on a bar cooler in Jacksonville, FL. They cleaned the condenser coil to remove dust and improve airflow, confirmed the fans functioned properly, and verified the box temperature reached the desired level. The system is operating correctly.

Chills on Wheels Heating and Air Contractors Inc serviced a bar cooler in Jacksonville, FL. They cleaned the condenser coil to remove dust, ensured all fans worked, and checked the box temperature at 47.5 degrees. The system is operating properly after maintenance for improved airflow and heat transfer.

Chills on Wheels Heating and Air Contractors Inc serviced HVAC systems in Jacksonville, FL by cleaning the condenser coil, checking fan operation, confirming temperature sensor accuracy, and ensuring the box temperature maintained a safe level of 40 degrees.

Chills on Wheels Heating and Air Contractors Inc inspected a 25-year-old R22 HVAC system in Jacksonville, FL. They replaced three 16201 filters and examined electrical components. They found severe corrosion on the evaporator coil and compressors, increasing the risk of future leaks and system failures.

Chills on Wheels Heating and Air Contractors Inc replaced 17 filters, cleaned the evaporator coil, tightened loose fan belts, inspected electrical components, fans, and compressors, and checked system pressures on a 20-year-old HVAC unit in Jacksonville, FL. They recommend replacing the unit due to its age.

Chills on Wheels Heating and Air Contractors Inc in Jacksonville, FL replaced eight 20252 filters and inspected coils, fan belt, fan and compressor amps, and electrical components. They identified low R22 refrigerant and corrosion in compressors, recommending unit replacement due to potential leaks.

Chills on Wheels Heating and Air Contractors Inc cleaned and serviced an HVAC system in Jacksonville, FL. They removed and cleaned the evaporator coil, blower wheel, and drain pan, repaired wiring, installed a hard start kit, replaced a contactor, added refrigerant, and conducted pressure and vacuum tests.

Chills on Wheels Heating and Air Contractors Inc completed a thorough cleaning of the HVAC unit in Jacksonville, FL. They removed the blower wheel and housing, then sprayed and brushed the fins to ensure the unit is clean and functioning properly.

Chills on Wheels Heating and Air Contractors Inc serviced an HVAC condenser in Jacksonville, FL. They removed the fan and top, cleared debris, cleaned condenser coils with water, replaced insulation on exterior lines, and secured wiring to copper lines. The system is now free of obstructions and clean.

Chills on Wheels Heating and Air Contractors Inc inspected an HVAC system in Jacksonville, FL. They found a clogged evaporator coil and blower wheel causing strain. The unit needs a hard start kit and a new contactor due to damage from constant cycling. The 12-year-old system requires repairs or replacement.

Chills on Wheels Heating and Air Contractors Inc in Jacksonville, FL cleaned and serviced a window air conditioning unit. They removed the unit, disassembled it, cleaned internal parts including the blower wheel and coils, applied an odor-removing spray, reassembled, and reinstalled it. The unit now functions with a vent temperature of 56 degrees.

Chills on Wheels Heating and Air Contractors Inc inspected the HVAC system in Jacksonville, FL. They checked pressures, fan and compressor amps, electrical components, coils, and blower motor amps. The drain pan and attic area were also inspected to ensure proper operation and maintenance.

Chills on Wheels Heating and Air Contractors Inc inspected an HVAC system in Jacksonville, FL. They checked the condenser unit, compressor and fan motor amps, coils, and capacitors. They found a leaking Schrader valve and low refrigerant, replaced the air handler filter, and recommended valve replacement with an estimate for repairs.

Chills on Wheels Heating and Air Contractors Inc in Jacksonville, FL inspected HVAC units by checking pressures, condenser and evaporator coils, fan and compressor amps, and blower motor. The service included filter replacement and identified the need for coil and drain pan cleaning with a drain flush.

Chills on Wheels Heating and Air Contractors Inc inspected an HVAC system in Orange Park, FL. They found no ice on the evaporator but identified a nonworking fan motor. The unit’s cooler maintains temperature, but replacing the fan motor is necessary for consistent operation.

Chills on Wheels Heating and Air Contractors Inc serviced an HVAC unit in Interlachen, FL. They inspected and repaired electrical components, cleaned the drain and pan, secured ductwork, fixed insulation, installed security caps to prevent leaks, and verified proper vent temperatures to ensure the system operates correctly.

Chills on Wheels Heating and Air Contractors Inc completed a full change-out of a 3-ton Goodman HVAC system in Glen Saint Mary, FL. The service included installing a new refrigerant line set, low-voltage wiring, high-voltage power, and electrical disconnect. The team tested for leaks, evacuated moisture, and installed a thermostat and condensate drain line.

Chills on Wheels Heating and Air Contractors Inc replaced a leaking coil in an upstairs air handler in Jacksonville, FL. They removed and reinstalled the coil, replaced the TXV, installed a new LLFD, pressure-tested the system, pulled a vacuum, and charged it with R-410a refrigerant. The system now operates properly.

Chills on Wheels Heating and Air Contractors Inc serviced an HVAC system in College Station, TX. The work involved removing an existing blower assembly, performing electrical current testing with a clamp meter, and measuring temperature differences using a digital thermometer to assess system performance.

Chills on Wheels Heating and Air Contractors Inc replaced leaking line sets with new copper lines and Armaflex insulation in Jacksonville, FL. They pressure tested, vacuumed, charged the unit, verified pressures and temperatures, and sealed entry points. The HVAC system now operates correctly.

Chills on Wheels Heating and Air Contractors Inc in Jacksonville, FL removed and reinstalled an attic-mounted air handler. They replaced the supply and return plenums, secured ductwork connections, and sealed all joints with mastic sealant and tape to ensure airtight performance and proper system operation.

Chills on Wheels Heating and Air Contractors Inc in Jacksonville, FL installs linesets requiring over 100 feet of copper piping routed up a building side, through the attic, and into the unit closet. The service includes armaflex insulation, protective covers, refrigerant addition, and filter dryer installation.

Chills on Wheels Heating and Air Contractors Inc in Jacksonville, FL inspects HVAC systems to identify duct damage, moisture issues, and insulation gaps. They recommend full duct replacement due to animal damage and installing attic insulation to prevent condensation and growth on vents. Debris removal is not included.

Chills on Wheels Heating and Air Contractors Inc diagnosed and reset a tripped transformer in the air handler in Jacksonville, FL. They repaired cut thermostat wires at the outdoor unit using butt connectors and electrical tape. The system was tested and restored to proper working condition.

Chills on Wheels Heating and Air Contractors Inc serviced an HVAC system in Jacksonville, FL by replacing the evaporator coil thermistor, clearing error codes, and calibrating the thermostat. They tested the system in cooling and heating modes, confirming accurate temperature control and proper operation.

Chills on Wheels Heating and Air Contractors Inc inspected a system in Jacksonville, FL, after a failed reversing valve replacement caused multiple leaks and refrigerant loss. They recommended a full system replacement and provided the customer with an estimate and financing options.

Chills on Wheels Heating and Air Contractors in Jacksonville, FL inspected and adjusted your unit’s condensate drain pipe for proper drainage. They also checked the pump and coils. They offer flex duct repairs, install a bathroom vent connection with about 25 feet of flex duct, and cover exposed garage ductwork with duct board.

Chills on Wheels Heating and Air Contractors Inc in Jacksonville, FL inspected a freezing air handler. They found a burned-out blower motor causing airflow issues and completed a full blower motor replacement to restore the system’s function.

Chills on Wheels Heating and Air Contractors Inc inspected and serviced an HVAC system in Jacksonville, FL. They changed the filter, checked the evaporator coil, blower wheel, electrical components, pressures, fan and compressor amps, and cleaned the condenser coil. The system functions properly.

Chills on Wheels Heating and Air Contractors Inc inspected an HVAC system in Jacksonville, FL, tested the capacitor, and diagnosed a faulty condenser fan motor. They recommend replacing the condenser fan motor to restore proper system function.

Chills on Wheels Heating and Air Contractors Inc completed the removal and replacement of a rooftop Daikin HVAC unit in Gainesville, FL. The work involved lifting the old unit off the roof and installing a new system on a metal platform secured to the rooftop surface.

Chills on Wheels Heating and Air Contractors Inc in Jacksonville, FL, replaced an outdoor condensing unit and indoor air handler. They installed new copper piping, secured the unit with hurricane tie-downs, connected ductwork and wiring, and insulated lines. The system was tested, vacuumed, and equipped with a new thermostat for reliable operation.

Chills on Wheels Heating and Air Contractors Inc inspected an HVAC unit in Jacksonville, Florida. They tested system pressures, electrical components, coils, fans, voltage, and amperage. They identified a faulty outside fan contactor that requires replacement for proper unit operation.

Chills on Wheels Heating and Air Contractors Inc replaced the condensing unit and air handler in Fruit Cove, Florida. They installed new equipment, secured the unit with hurricane tie-downs, added a 5kW heat strip, upgraded the breaker to 50 amps, and tested the system to ensure proper operation.

Chills on Wheels Heating and Air Contractors Inc serviced a heating system in Jacksonville, Florida. They reprogrammed the thermostat to restore proper heating function and began reviewing warranty details since the unit was originally installed by their team.

Chills on Wheels Heating and Air Contractors Inc replaced the air handler and condenser in Fruit Cove, Florida. They modified the supply plenum, connected refrigerant lines with nitrogen brazing, pressure-tested for leaks, pulled a vacuum, and anchored the condenser securely. The system was fully tested and confirmed operational.

Chills on Wheels Heating and Air Contractors Inc installed a new air handler and condenser in Jacksonville, Florida. They replaced refrigerant lines, sealed penetrations, and performed vacuum and pressure tests. The system was tested for cooling performance and verified to operate within normal parameters before completion.

Chills on Wheels Heating and Air Contractors Inc inspected an HVAC system in Jacksonville, Florida. They cleaned the condenser coil and blower wheel to improve performance. They assessed the thermostat, noting contact issues but postponed replacement. The system's pressures and temperatures were checked and found to be normal.

Chills on Wheels Heating and Air Contractors Inc inspected an 18-year-old HVAC system in Jacksonville, FL. They found a clogged, corroded evaporator coil with refrigerant loss. Due to damage and age, they recommended a full system replacement, including a new filter dryer. The underground line set to the second floor complicates replacement.

Chills on Wheels Heating and Air Contractors Inc offers duct resealing with mastic, professional cleaning of six vents and return grills, and cleaning of all vent grills in Jacksonville, FL. They inspect filters and ensure boots are properly sealed to maintain HVAC system efficiency.

Chills on Wheels Heating and Air Contractors Inc inspected and tested an HVAC system in Jacksonville, FL. They reset error codes, confirmed the Electronic Expansion Valve works correctly, and identified that the main control board needs replacement due to intermittent communication issues causing heat strips to activate incorrectly.

Chills on Wheels Heating and Air Contractors Inc inspected a freezer in Jacksonville, FL, and fixed its temperature issue. They adjusted the defrost cycles to run later in the day and overnight. After the adjustments, the freezer properly lowered its temperature and worked correctly.

Chills on Wheels Heating and Air Contractors Inc serviced an HVAC system in Jacksonville, FL. They replaced a faulty capacitor in the condenser unit, restoring cooling function. The team inspected the filter, coils, amperage, and blower wheel, recommending professional cleaning of the condenser coil and blower wheel to maintain efficiency.

Chills on Wheels Heating and Air Contractors Inc serviced a refrigeration system in Jacksonville, Florida. They removed the base valve, flushed the system with nitrogen, installed new quarter-turn valves, performed a nitrogen pressure test, evacuated the system below 400 microns, charged it with R-404a, and confirmed proper operation.

Chills on Wheels Heating and Air Contractors Inc inspected a sealed attic space with a flat roof in Palatka, FL. They found inadequate insulation and poor airflow due to a single vent and no return. They recommend installing a mini-split system to improve temperature control and airflow.

Chills on Wheels Heating and Air Contractors Inc replaced a noisy condenser fan motor and cleaned the condenser coil in Jacksonville, FL. They tested pressures and temperatures to ensure the HVAC system operates correctly and efficiently after service.

Chills on Wheels Heating and Air Contractors Inc inspected an unresponsive thermostat in Jacksonville, FL, replacing a blown fuse. They identified stripped outdoor thermostat wiring, a dirty evaporator coil needing professional cleaning, and a refrigerant leak requiring a full leak search and repair. Repairs or system replacement are advised.

Chills on Wheels Heating and Air Contractors Inc installed a front-draw HVAC system above a water heater in a second-floor unit in Jacksonville, FL. The project included running new copper lines through the first-floor chase, adding Armaflex insulation, thermostat wiring, and R-410A refrigerant, and coordinating sprinkler system drainage.

Chills on Wheels Heating and Air Contractors Inc repaired a faulty thermostat and replaced a wire to restore heating and cooling functions in Jacksonville, FL. They identified a noisy condenser fan motor needing replacement and recommended a condenser coil cleaning to maintain system performance.

Chills on Wheels Heating and Air Contractors Inc cleaned and vacuumed the dryer vent and duct system in Jacksonville, FL. They moved the dryer, removed and cleaned the transition tubing, vacuumed the vent port and lint trap, then reconnected all components for a fully cleaned system.

Chills on Wheels Heating and Air Contractors Inc inspected an HVAC unit in Jacksonville, FL, replaced a blown 5-amp fuse, and identified a faulty contactor causing heat mode failure. The system cools correctly but requires a new contactor for heating. The repair will be scheduled later per customer request.

Chills on Wheels Heating and Air Contractors Inc inspected and serviced an HVAC unit in Jacksonville, FL. They checked temperatures, electrical components, fan amps, and blower wheel. They replaced the filter and demonstrated its replacement. They cleaned the condenser fan and removed debris to maintain system efficiency.

Chills on Wheels Heating and Air Contractors Inc inspected a garage HVAC unit in Jacksonville, FL. They tested fan amps and blades, checked the evaporator coil, replaced the filter, and verified temperatures. They recommend cleaning the blower wheel and outdoor condenser coil and replacing worn Armaflex insulation to improve airflow and reduce motor stress.

Chills on Wheels Heating and Air Contractors Inc replaced a faulty EEV valve in a system in Jacksonville, FL. They brazed, pressurized, vacuumed, and charged the unit with 410A refrigerant, then tested the system for proper heating and cooling operation.

Chills on Wheels Heating and Air Contractors Inc replaced an air handler system in Jacksonville, FL. They removed the old unit and concrete pads, installed new copper lines with filters, extended electrical wiring, assembled the new air handler inside a closet, and performed a full system test.

Chills on Wheels Heating and Air Contractors Inc installed a heat kit, thermostat, and transformer to enable heating and cooling in Jacksonville, FL. They tested heat strips and cooling temperatures. The system requires a 10x10x1 filter and a professional condenser coil cleaning for optimal performance.

Chills on Wheels Heating and Air Contractors Inc inspected and serviced an air handler and condenser unit in Jacksonville, FL. They checked electrical components, coils, compressor and fan motor amps, and system pressures. They installed a new air filter and recommended a power surge protector to protect the circuit board.

Chills on Wheels Heating and Air Contractors Inc replaced a leaking evaporator coil in Jacksonville, FL. They installed a new coil, reused the old EEV valve, brazed copper lines, vacuumed the system to 200 microns, and pressurized it to check for leaks. They identified an EEV valve failure and scheduled a follow-up.

Chills on Wheels Heating and Air Contractors Inc cleaned and removed lint from a dryer vent and duct in Jacksonville, FL. They used a duct machine to clean the dryer duct, removed lint from the roof, cleaned inside and back of the dryer, and ensured the dryer worked lint-free.

Chills on Wheels Heating and Air Contractors Inc repaired a locked-out HVAC unit in Jacksonville, FL. They reset the breakers and restored operation after a drain clearance issue triggered the flow switch. They recommend installing a hard start kit to improve startup performance and reduce electrical strain.

Chills on Wheels Heating and Air Contractors Inc inspected an air handler in an attic in Jacksonville, FL. They found a leak in the evaporator coil and recommend replacing the coil, installing a new filter dryer, and recharging the refrigerant to restore proper system function.

Chills on Wheels Heating and Air Contractors Inc inspected and cleaned the air handler and condenser unit in Jacksonville, FL. They removed debris, cleaned coils and blower components, vacuumed the drain pan, replaced insulation, and tested the system to ensure proper operation.

Chills on Wheels Heating and Air Contractors Inc fixed a short circuit on a high voltage whip in a heating and air system in Jacksonville, Florida. They cut off damaged wire tips and spliced the wires to restore proper system function.

Chills on Wheels Heating and Air Contractors Inc repaired a condensate drain system in Jacksonville, FL. They inspected the drain, glued the PVC pipe, and tightened the condensate pump clamp. After repairs, they cleaned the area and monitored the unit to confirm proper operation.

Chills on Wheels Heating and Air Contractors Inc recommends installing two 10x10 return grills on the closet’s side walls in Jacksonville, FL. This installation increases airflow and reduces high suction pressure to improve HVAC system performance.

Chills on Wheels Heating and Air Contractors Inc replaced a dirty 16x20x1 air filter in Jacksonville, FL. They inspected the air handler, blower wheel, coils, fan amps, condenser, voltage, and electrical components to ensure the HVAC system functions properly.

Chills on Wheels Heating and Air Contractors Inc replaced a heat pump system in Jacksonville, FL, removing the old air handler and condenser. They installed a 4-inch hurricane-rated concrete pad, new refrigerant piping with leak testing, safety switches, and a WiFi programmable thermostat. Lines were pressurized, vacuumed below 400 microns, and the job included a free one-year maintenance plan with biannual inspections.

Chills on Wheels Heating and Air Contractors Inc inspected and repaired a disconnected return box in Jacksonville, FL. They resealed the box with mastic and silver tape, sealed supply flex ducts, removed water from the secondary pan, cleaned insulation, and cleared debris from the attic to ensure proper HVAC function.

Chills on Wheels Heating and Air Contractors Inc inspected a condenser coil leak in Jacksonville, FL. They found a leak on the low-side service valve and previous improper leak lock application. They recommend replacing both service and Schrader valves, the filter dryer, and recharging the refrigerant accurately.

Chills on Wheels Heating and Air Contractors Inc corrected wiring issues and recharged the HVAC system with 5 lbs of R-410A refrigerant in Jacksonville, FL. They stabilized the system operation and recommended a follow-up service to locate and repair the refrigerant leak.

Chills on Wheels Heating and Air Contractors Inc serviced an air conditioning unit in Jacksonville, FL, adding 6 lbs of refrigerant to a system with multiple leaks in the compressor and coils. The technician identified significant corrosion and recommended a full system replacement for reliable operation.

Chills on Wheels Heating and Air Contractors Inc installed new fuses, replaced defrost timer components, and fitted a 3-pole contactor with an auxiliary switch in Jacksonville, FL. They tested the system, confirming proper operation and effective cooling performance.

Chills on Wheels Heating and Air Contractors Inc in Jacksonville, FL, ensures precise billing and invoicing with clear documentation, supporting transparent customer transactions and streamlined HVAC service management.

Chills on Wheels Heating and Air Contractors Inc replaced a faulty condenser fan motor and installed a new 16201 filter in Jacksonville, FL. They rewired components, reinstalled the security cage, and tested operating temperatures to ensure the unit works properly.

Chills on Wheels Heating and Air Contractors Inc replaced a faulty 30-amp breaker in an HVAC system in St. Augustine, FL. They inspected electrical components and tested the unit, confirming proper operation in both cooling and heating modes.

Chills on Wheels Heating and Air Contractors Inc performed HVAC maintenance in Jacksonville, FL. They removed the fan and outer casing, cleaned internal debris and coils, applied coil cleaner, rinsed all parts, reassembled the unit securely, and restored power. The unit now operates properly.

Chills on Wheels Heating and Air Contractors Inc installed a new drain line and insulated copper lines in Jacksonville, FL. This ensures proper drainage, reduces moisture buildup, and improves HVAC system efficiency. The system is now functioning correctly and in good condition.

Chills on Wheels Heating and Air Contractors Inc inspected and repaired an HVAC system in Jacksonville, FL. They replaced a faulty capacitor and fixed damaged low voltage wiring. After repairs, the system was tested to ensure amp draws and refrigerant levels met manufacturer standards for proper operation.

Chills on Wheels Heating and Air Contractors Inc performed maintenance on an HVAC unit in Jacksonville, FL. The service included removing and cleaning the fan, coils, and outer casing, applying coil cleaner, rinsing all components and surroundings, reassembling the unit, and restoring power to ensure proper operation.

Chills on Wheels Heating and Air Contractors Inc inspected your HVAC system in Jacksonville, FL. They checked the thermostat, filter, coil, blower wheel, float switch, and capacitor. The system was found to be functioning properly after the thorough inspection.

Chills on Wheels Heating and Air Contractors Inc diagnosed and identified a faulty condenser fan motor in Jacksonville, FL. They confirmed the capacitor functioned correctly and recommended replacing the motor to restore proper system operation.

Chills on Wheels Heating and Air Contractors Inc repaired a non-functioning outdoor HVAC unit in Jacksonville, FL by replacing a blown 45+5 capacitor. The team also inspected pressures, coils, and filters to ensure proper cooling and heating system operation.

Chills on Wheels Heating and Air Contractors Inc inspected coils, electrical components, fans, system pressures, and amp draws during a service in Jacksonville, FL. They recommended installing a power surge protector to extend equipment lifespan based on the system's condition.

Chills on Wheels Heating and Air Contractors Inc serviced an HVAC system in Jacksonville, FL. They flushed the drain line, replaced the filter, installed a PVC drain T, checked system pressures and wiring, and reset the thermostat to ensure proper operation.

Chills on Wheels Heating and Air Contractors Inc inspected an HVAC unit in Jacksonville, FL, finding no refrigerant and two leaks: one at the compressor and another on the high-side line. The unit shows significant corrosion, and a full replacement is recommended to prevent further issues.

Chills on Wheels Heating and Air Contractors Inc inspected a 20-year-old 5-ton, 3-phase HVAC unit in Jacksonville, FL. They found a blown compressor and a damaged evaporator coil. They recommend a full system replacement due to the unit's age and condition.

Chills on Wheels Heating and Air Contractors Inc reconfigured outdoor P-traps to fix drainage issues in Lake City, FL. They ensured both systems drain properly and cool efficiently. The repair stopped Unit 1 from cycling on and off due to a faulty outdoor trap.

Chills on Wheels Heating and Air Contractors Inc repaired a thermostat issue in Jacksonville, FL. They identified a faulty 40-amp breaker causing low voltage to the condenser. After replacing the breaker, the system received full voltage and operated correctly.

Chills on Wheels Heating and Air Contractors Inc replaced and wired indoor and outdoor HVAC units in Jacksonville, FL. They extended high voltage lines, connected and sealed ductwork, installed new drain pans, leveled the system, and ensured proper drainage and function by testing and cleaning components.

Chills on Wheels Heating and Air Contractors Inc repaired a heating and cooling unit in Jacksonville, FL. They diagnosed a faulty reversing valve wiring, replaced the incorrect wire, and restored cooling function. Loose wires were secured with zip ties for safety and neatness.

Chills on Wheels Heating and Air Contractors Inc inspected a 2011 York air handler in Jacksonville, FL. They found the main control board faulty as it supplied 240V to the motor but failed to provide the 24V output needed to activate the system.

Chills on Wheels Heating and Air Contractors Inc repaired a malfunctioning HVAC system in Jacksonville, FL, by replacing a blown 5-amp fuse and a damaged circuit board. They recommend cleaning the evaporator and blower wheel and replacing the 18x18x1 filter and filter drier to maintain system performance.

Chills on Wheels Heating and Air Contractors Inc replaced a heat pump system in Jacksonville, FL. They removed old equipment, installed a hurricane-rated concrete pad, new refrigerant lines, and safety switches. The team vacuum tested the system and included a free maintenance plan with permits and inspections.

Chills on Wheels Heating and Air Contractors Inc inspected and repaired an air handler leak in an attic in Jacksonville, FL. They sealed the front cover, replaced suction line insulation, cleaned condenser coils, replaced the air filter, and recharged the system with refrigerant to restore proper function.

Chills on Wheels Heating and Air Contractors Inc replaced a faulty TXV valve in an air conditioning system in Jacksonville, FL. They removed covers, cleared space on the drain line, recovered refrigerant, installed the new valve, checked for leaks with nitrogen, and added R-410A refrigerant to restore proper function.

Chills on Wheels Heating and Air Contractors Inc serviced an HVAC system in Palm Coast, FL. They replaced the air filter, inspected coils and blower wheel, measured blower motor and compressor amps, secured loose wiring, checked system pressures, and cleaned the drain line. The system now functions properly.

Chills on Wheels Heating and Air Contractors Inc replaced and installed a new air handler and condenser unit in Jacksonville, FL. They soldered copper lines, extended wiring, secured components, added a new pad, and tested the system to ensure it operates within specifications.

Chills on Wheels Heating and Air Contractors Inc repaired an HVAC system in Jacksonville, FL. They removed the old squirrel cage, blower motor, and wheel, installed new parts, rewired the system, and tested it. The HVAC unit now operates quietly and efficiently.

Chills on Wheels Heating and Air Contractors Inc inspected an HVAC unit in Jacksonville, FL. They found the condenser fan locked, a failed capacitor, a bad compressor, low R22 refrigerant, and multiple issues. They recommended replacing the unit for reliable operation.

Chills on Wheels Heating and Air Contractors Inc inspected RTU 38 in Jacksonville, FL. They found a broken fan belt, low refrigerant, compressor corrosion, and damaged electrical parts. The unit uses outdated R22 refrigerant and requires extensive repairs. They recommend a full replacement for reliable operation.

Chills on Wheels Heating and Air Contractors Inc replaced a thermostat and tested the heating and cooling system in Jacksonville, FL. They ensured the system functions correctly and inspected the air filter during the visit.

Chills on Wheels Heating and Air Contractors Inc inspected the condenser unit and electrical components in Jacksonville, FL. They identified that the condenser coil needs deep cleaning. Access to the third-floor air handler was unavailable and requires rescheduling to complete the inspection.

Chills on Wheels Heating and Air Contractors Inc inspected the unit, coils, and electrical components in Jacksonville, FL. They replaced the filter, checked the blower wheel, and recommended condenser cleaning to maintain the unit’s performance.

Chills on Wheels Heating and Air Contractors Inc inspected the HVAC unit, coils, electrical parts, and blower wheel in Jacksonville, FL. They replaced the filter with a new 23201 filter. The thermostat could not be accessed due to locked doors and no one on-site.

Chills on Wheels Heating and Air Contractors Inc inspected and tested the heating and cooling system in St. Augustine, FL. They confirmed the system operates properly with correct amp draws in cool and heat modes, ensuring efficient performance and reliable temperature control.

Chills on Wheels Heating and Air Contractors Inc inspected a 2016, 2.5-ton HVAC unit in Jacksonville, FL. They identified a faulty 9-pin blower motor and an unbalanced blower wheel needing replacement. The outside condenser fan also showed wear, signaling potential further repairs or system replacement.

Chills on Wheels Heating and Air Contractors Inc performed HVAC maintenance in Jacksonville, FL. The technician checked electrical components, cleaned evaporator and condenser coils, flushed and treated the drain, replaced the filter, and verified blower wheel and system pressures. A corroded outdoor filter drier was also identified.

Chills on Wheels Heating and Air Contractors Inc inspected a unit in Jacksonville, FL, that was blowing a 5-amp fuse. They found and disconnected a faulty temperature sensor, restoring the unit's proper function. The customer does not use the emergency heat feature.

Chills on Wheels Heating and Air Contractors Inc replaced an evaporator coil in Jacksonville, FL, ensuring proper installation to maintain HVAC efficiency and reliable, energy-saving cooling performance.

Chills on Wheels Heating and Air Contractors Inc inspected an HVAC system in Jacksonville, FL, finding a faulty condenser fan motor and a needed replacement capacitor. They recommend installing a new filter and professionally cleaning dirty ducts to restore proper system operation.

Chills on Wheels Heating and Air Contractors Inc in Jacksonville, FL, replaced an old heat pump air handler and condenser. They installed a new hurricane-rated concrete pad, flushed refrigerant lines, set up a new heat pump thermostat, and ensured all refrigerant lines were leak-free. The project included safety switch installations and a maintenance plan.

Chills on Wheels Heating and Air Contractors Inc replaced a Honeywell zone board and two thermostats, configured the zone board for a heat pump, and changed the system filter. They tested the HVAC system’s heating and cooling functions to ensure proper operation in Jacksonville, Florida.

Chills on Wheels Heating and Air Contractors Inc inspected an attic air handler in Jacksonville, FL. They checked electrical parts, fans, coils, and system temperatures. They tested pressures, voltage, compressor amps, and fan amps. The 2021 system works well, and they recommend adding power surge protectors to prevent future electrical issues.

Chills on Wheels Heating and Air Contractors Inc inspected an HVAC system in Jacksonville, FL. They checked the unit, coils, electrical components, refrigerant levels, pressures, and temperatures. They recommend cleaning the condenser coil and blower wheel to maintain performance and suggest considering system replacement due to its age.

Chills on Wheels Heating and Air Contractors Inc inspected an HVAC condenser unit in Jacksonville, FL, discovering a refrigerant leak, a faulty capacitor with corrosion, and dirty condenser coil and blower wheel. They recommend cleaning, capacitor replacement, and a full system replacement due to the unit’s age and condition.

Chills on Wheels Heating and Air Contractors Inc inspected an HVAC system in Jacksonville, FL. They found the TXV valve on the indoor evaporator coil was faulty. The valve caused high and low head pressures, stopping proper function. Replacing the valve will restore system performance.

Chills on Wheels Heating and Air Contractors Inc replaced a faulty condenser motor fan and blade, reassembled the condenser jacket, and cleaned the area in Jacksonville, FL. The unit now operates correctly. Technicians advised staff to maintain the refrigerator until it reaches the set temperature.

Chills on Wheels Heating and Air Contractors Inc inspected a heating system in Jacksonville, FL. They fixed thermostat settings to restore proper heating and cooling function, ensuring heat strips and heat pump operate. They recommend installing a thermostat lock box to avoid future settings issues.

Chills on Wheels Heating and Air Contractors Inc inspected an HVAC system in Jacksonville, FL. They tested the system and found the reversing valve stuck in heat mode, likely due to the valve's age. They identified the component issue affecting the system's performance.

Chills on Wheels Heating and Air Contractors Inc serviced and inspected the HVAC system in Jacksonville, Florida. They checked pressures, coils, fans, and electrical parts to ensure the system operates correctly. The HVAC system is confirmed to function properly after a thorough evaluation.

Chills on Wheels Heating and Air Contractors Inc inspected and tested the heating system in Jacksonville, FL. They checked heat strips, sensors, electrical parts, and duct temperatures. The technician switched the thermostat to electrical heat but found corrosion and faulty sensors. They recommend a full system replacement due to age and condition.

Chills on Wheels Heating and Air Contractors Inc installed a new board in Jacksonville, FL. The unit shut off immediately after activation, showing cool fail and heat fail alerts. The thermostat needs replacement before any maintenance can be completed.

Chills on Wheels Heating and Air Contractors Inc fixed wiring issues in a heating system in Jacksonville, FL. They re-wired the zone board and thermostats to restore heat function. Replacement of the zone board and two thermostats is recommended for long-term system reliability.

Chills on Wheels Heating and Air Contractors Inc diagnosed a power surge that tripped the compressor in Jacksonville, FL. They cooled the compressor and tested the system, restoring proper function for both heating and cooling. Customers can request further assistance as needed.

Chills on Wheels Heating and Air Contractors Inc in Palm Coast, FL, moves condenser units by relocating the unit up to 25 feet. They extend copper piping, electrical wiring, and thermostat wires, reinstalling disconnect boxes to match the new location efficiently and safely.

Chills on Wheels Heating and Air Contractors Inc in Jacksonville, FL diagnosed a compressor lockout caused by a leaking evaporator coil. They propose replacing the coil, installing a new filter dryer, performing a pressure test, and recharging the system with R-410A refrigerant to restore efficient operation.

Chills on Wheels Heating and Air Contractors Inc inspected and repaired an HVAC unit in Jacksonville, FL. They replaced the [455] contactor, checked amp draws and system pressures, and replaced the armaflex at the condenser. The system now operates within manufacturer specifications.

Chills on Wheels Heating and Air Contractors Inc cleaned 26 registers and the CU coil in a Jacksonville, FL home. The team uninstalled grills, cleaned the blower wheel, wiped the grills outside, then replaced and set them properly. They protected floors and swept the work area after completion.

Chills on Wheels Heating and Air Contractors Inc inspected an HVAC system in Jacksonville, FL. They found low pressure at 22 and high pressure at 250. The capacitor was good, but the TXV on the evaporator coil was cooling prematurely. They recommend estimating TXV replacement and checking the warranty.

Chills on Wheels Heating and Air Contractors Inc serviced an iced-up HVAC system in Jacksonville, FL. They deiced indoor and outdoor coils, cleaned the evaporator coil and blower wheel, identified refrigerant leaks, and recommended replacing the 12-year-old unit with a new 2.5-ton split heat pump for better efficiency and reliability.

Chills on Wheels Heating and Air Contractors Inc repaired a major refrigerant leak in a line set in Jacksonville, FL. They replaced the damaged line set and recharged the system with 410A refrigerant to restore proper function.

Chills on Wheels Heating and Air Contractors Inc replaced old copper line sets with new insulated 34 and 38 copper lines including thermostat wire in Jacksonville, FL. They pressurized the system with nitrogen, performed a vacuum, recharged it with R32 refrigerant, and filled the chase with foam to ensure proper operation.

Chills on Wheels Heating and Air Contractors Inc installed two new condensing units and air handling systems in Starke, FL. The project included concrete pad installation, copper piping insulation, wiring connections, vent tying, and system testing to ensure operation within manufacturer specifications. Filters and safety components were replaced and secured.

Chills on Wheels Heating and Air Contractors Inc inspected walk-in cooler doors in Jacksonville, FL, finding gaps causing air leaks. They recommend installing new door gaskets and curtains to seal the doors. This repair improves temperature control and cooling efficiency.

Chills on Wheels Heating and Air Contractors Inc in Jacksonville, Florida inspected HVAC units, identifying the need for condenser and evaporator coil cleanings and six new 24242 filters. They cleaned fresh air filters, checked pressures, amp draws, and verified fan operation during maintenance.

Chills on Wheels Heating and Air Contractors Inc inspected an HVAC condenser in Jacksonville, FL, found its electric box cover missing, and installed a new capacitor and double pole contactor. They advise replacing the full system, including copper lines and low-voltage wiring, due to unit age and exposure.

Chills on Wheels Heating and Air Contractors Inc replaced electrical breakers with the correct 35 amp size in Jacksonville, Florida. They ensure electrical components meet required specifications for safe operation.

Chills on Wheels Heating and Air Contractors Inc in Starke, FL, replaced a heat pump system including air handler and condenser. They installed hurricane-rated concrete pads, flush and tested refrigerant lines, set up safety switches, anchored equipment securely, connected ductwork, and provided a new thermostat and maintenance plan with inspections.

Chills on Wheels Heating and Air Contractors Inc in Jacksonville, FL diagnosed a high voltage issue caused by a faulty contactor backfeeding and blowing a fuse. They restored fan and heat functions temporarily and recommend replacing the contactor and capacitor for reliable system operation.

Chills on Wheels Heating and Air Contractors Inc restored power to the outdoor condenser unit in a walk-in cooler in Lake City, Florida. They reset the tripped main breaker, ensured proper electrical supply, and confirmed the system's amp draws and refrigerant levels met specifications. The cooler reached the set temperature and operates fully.

Chills on Wheels Heating and Air Contractors Inc inspected an HVAC unit in Jacksonville, FL. They found a corroded condenser coil causing high head pressures and a non-functioning fourth fan. They recommend replacing the condenser coil, changing the 24x24x2 filters, and cleaning the evaporator coil to restore proper operation.

Chills on Wheels Heating and Air Contractors Inc inspected an HVAC system in Jacksonville, FL, finding a non-functional fan motor, grounded compressor, corroded condenser coil, and refrigerant leak. They recommend full unit replacement due to the system's poor condition and extensive repairs needed.

Chills on Wheels Heating and Air Contractors Inc inspected a non-working HVAC unit in Jacksonville, Florida. They found leak stains on the evaporator coil and low refrigerant levels. The unit, installed in 2017 with micro-channel coils, showed electrical issues. They recommend full replacement or a detailed leak search for repairs.

Chills on Wheels Heating and Air Contractors Inc repaired a burnt electrical contactor leg and rewired high voltage, bonding, and ground wires in Jacksonville, FL. They restored power and verified the system’s operation, confirming amp draws and refrigerant levels meet manufacturer standards.

Chills on Wheels Heating and Air Contractors Inc completed HVAC wiring services in Jacksonville, Florida. The team replaced thermostat wire, rewired indoor and outdoor units, programmed the thermostat, upgraded the condenser unit breaker, and labeled the heat kit. The system now runs efficiently in both heating and cooling modes. Locking cap installation is scheduled for a future visit.

Technicians inspected a failed 22-year-old R-22 heat pump in Lake City, Florida. They found the system iced over, with compressor fitting leaks, blocked air filters, and a broken evaporator fan motor. Based on the condition and age, they recommended a full system replacement to restore reliable heating and cooling.

Chills on Wheels Heating and Air Contractors Inc cleaned the condenser and evaporator coils and replaced the air filter in St. Augustine, Florida. Technicians rinsed dirt from the condenser coil, brushed and wiped the evaporator coil, and installed a new 20x20x1 filter to improve airflow and maintain system function.

Chills on Wheels Heating and Air Contractors Inc cleaned a condenser coil in Orange Park, Florida. Technicians removed the unit covers, applied coil cleaner, rinsed the coil with water, and reassembled the unit. This service helps improve system performance and reduces strain on the equipment.

A technician in Jacksonville, Florida inspected attic ductwork for air leaks, confirmed proper heat strip operation, and recorded vent temperatures exceeding 100 degrees. The heating system was verified to be working correctly at the time of service.